NICE SLIDING GATE AUTOMATION

Nice for Sliding Gates

Nice Sliding Gate Automation

Fast, sturdy, cutting-edge operators for residential, commercial and industrial use – Made In Italy

Backed by Nice Australia & Custom Auto Gates Pty Ltd

NICE ROAD – SLIDE GATE OPERATOR

For sliding gates weighing up to 400 kg. Basic entry level gate automation unit that delivers on quality. Basic adjustments – Speed, force and pause

Safety – Obstacle detection system

Motor – 210Watt
Force – 400N
Duty Cycle – 20 cycles / hour
IP Rating – 44
Dimensions – 330 x 195w x 277h
Weight – 8kg

NICE ROBUS 500 Fast – SLIDE GATE OPERATOR

Speed: class leading speed up to 0,43 m/s thanks to superb mechanical engineering and uncompromising component quality. Compatible: with Nice Solemyo solar power kit. Just plug it in to harness the power of the sun and enjoy a cable free installation!

Endurance: Robus redefines intensive use as a standard. Robus 500 guarantees no less than 450 operations per day.

Durability: base and release in pressure die cast aluminium and epoxy paint finish.

Silence: gear motor on bearings ensures silent operation.

Intelligence: the smart controller offers:
• temperature sensor to automatically
adapt to climatic conditions.

Safety – Obstacle detection system

Motor – 450Watt
Force – 360N
Duty Cycle – 20 cycles / hour
IP Rating – 44
Dimensions – 330 x 210w x 303h
Weight – 11kg

NICE ROBUS 1000 – SLIDE GATE OPERATOR

For Sliding Gates up to 1000Kg
Advanced: equipped with a temperature sensor: adapting the motor power to the climatic conditions and at the same time thermal cut-out

Compatible: with Nice Solemyo solar power kit. Just plug it in to harness the power of the sun and enjoy a cable free installation!

Intelligent: thanks to the obstacle detection system and automatic programming of the working times

Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.

Sturdy: base and release in pressure die cast with easy to open handle.

Very quiet: gear motor on bearings.

Safety – Obstacle detection system

Motor – 450Watt
Force – 900N
Duty Cycle – 50 cycles / hour
IP Rating – 44
Dimensions – 330 x 210w x 303h
Weight – 13kg

NICE ROBUS 400 & NICE ROBUS 600 models also available

NICE RUN1500 – COMMERCIAL SLIDE GATE OPERATOR

For Sliding Gate weighing up to 1500 kg – 24volt within built transformer, Electo-mechanical limit switch, built in control unit.

Temperature Sensor – Force management through adapting to different climatic and environmental conditions, while adapting the thermal cut-out protection and intensity of self ventilation, depending on the temperature reading

Intelligent – Obstacle detection system

Safe – Precise and reliable settings for acceleration and deceleration for start / end manoeuvres.

Sturdy Pressure die-cast aluminium base and release with epoxy painting. Aluminium handle for manual opening in event of power failure

Very Quiet – Due to the Gear Motor running on bearings

Motor – 400Watt / 240 V
Speed – 250mm per second
Force – 1000N
Duty Cycle – 60 cycles / hour
IP Rating – 44
Dimensions – 400 x 255 x 390h
Weight – 19kg

NICE RUN 2500L – COMMERCIAL OPERATOR WITH BUILT IN INVERTER

For Sliding Gate weighing up to 2500 kg. Ventilated motor with electo-mechanical limit switch, built in control unit and inverter.

Suitable for extreme conditions and intensive use

Safe: Precise and reliable settings for acceleration and deceleration for start / end manoeuvres.

Temperature Sensor: Force management through adapting to different climatic and environmental conditions, while adapting the thermal cut-out protection and intensity of self ventilation, depending on the temperature reading

Sturdy Pressure die-cast aluminium base and release with epoxy painting. Aluminium handle for manual opening in event of power failure

Very Quiet: Due to the Gear Motor running on bearings

Power: 3 Phase Motor running via the onboard inverter – this unit uses standard 240V power 10 Amp outlet

Motor – 650Watt / 240 V
Speed – 260mm per second
Force – 1660N
Duty Cycle – 56 cycles / hour
IP Rating – 44
Dimensions – 400 x 255 x 390h
Weight – 25kg

NICE TUB – INDUSTRIAL OPERATOR

For sliding gates weighing up to 3500 kg. Ideal for industrial use

Powerful: 550 W absorbed output and a peak thrust of over 400 Nm.

Functionality and safety: programmable, electronic brake which prevents gate inertia; self-ventilated motor to increase the working cycles; optional PIU card to increase the basic functions; possibility of slowdown.

Maximum durability and silence: bronze and metal gears.

Advanced: Tub meets all requirements in terms of control, thanks to the functions which can be selected by means of dip-switch.

Practical: the lever release enables safe and simple operation

Motor – 550Watt / 400 V
Force – 7740N
Duty Cycle – 200 cycles / Day
IP Rating – 44
Dimensions – 480 x 240x 580 h
Weight – 60kg